Skip to content
Kibi Connect
Manual Kibi Connect

Set up buddy via USB-C

Updated Reading time: 2 min

On this page

If your Kumpel doesn't have Wi-Fi yet, set it up via USB-C using the Kibi desktop app. After that, it will go online via your Wi-Fi.

Info

Bluetooth is no longer available on the Kumpel. You set it up via USB-C in the desktop app. If it's already on Wi-Fi, simply pair it using a code or QR code, see Pair Kumpel via code or QR.

What you need#

  • A computer with the Kibi desktop app version 0.9.5 or higher, logged in with your account.

  • A USB-C cable.

  • The name and password of the Wi-Fi. The Kumpel only uses 2.4 GHz.

  • The permission Manage Kumpel if you are assigning the Kumpel to someone.

Step by step#

Connect. Connect the Kumpel directly to the computer via USB-C.

Open Kibi app. Open the Kibi app on the computer and select Kumpel from the left menu.

Find Kumpel. A card with the serial number "SN: KD-..." will appear there. Below it, you'll see Set up Kumpel with three steps.

1. Wi-Fi. Select the Wi-Fi and enter the password.

2. Employee. Select a person, Pair for myself, or Assign to no one (QR code on Kumpel).

3. Mode. The mode determines what the Kumpel is used for. The modes are listed under Manage Kumpel.

Done. The Kumpel connects via Wi-Fi and displays "Hello" with the first name. If you selected Assign to no one, it will show a code and a QR code. The person then pairs it themselves, see Pair Kumpel via code or QR.

What happens next#

  • Assigned to a person: If the person has used Kibi before, they release the Kumpel using the number on its display. Until then, the Kumpel shows "Waiting for release." How to do this is explained under Release and use Kumpel.

  • Assigned to no one: The Kumpel displays a code and a QR code. Whoever receives it can pair it later themselves, see Pair Kumpel via code or QR.

Warnung

Everything the Kumpel does happens in the name and with the rights of the person whose account it is connected to. Therefore, only give a configured Kumpel to the correct person.

If it doesn't work#

  • No Wi-Fi found: The Kumpel only uses 2.4 GHz. Check if such a network is nearby.

  • Wrong Wi-Fi password: Check uppercase and lowercase letters and enter it again.

  • Your Kumpel previously ran via your phone: This is no longer possible. Set it up once via USB-C with Wi-Fi as described above.